Huawei eSpace 8850 User Manual Download

Page: 46 / 89

Table 4-4

Buttons on the voice or video call screen

Button

Function

Turn on/off the hands-free function.

Mute the microphone.

Unmute the microphone.

Switch to the headset mode.

Open or close the dialer.

Switch between the day and night modes.

Switch among the local video, remote video, and PIP modes.

Play videos in full screen mode.

Play videos in normal mode.

4.6.1 Adjusting the Volume

When you press the volume buttons on the side panel, the volume slider

displayed.

Non-Calling Screen

Press the

button to increase the volume.

Press the

–

button to decrease the volume.

Calling Screen or dialing Screen

Press the

button to increase the volume.

Press the

–

button to decrease the volume.

4.6.2 Switching Between the Handset, Hands-free, and Headset
Modes

In the voice and video call status, you can switch between the handset, hands-free, and headset
modes and display the current voice output mode in the status bar.

NOTE

You must connect the headset to eSpace 8850 before switching to the headset mode.

eSpace 8850 Video Phone
User Guide

4 Phone Features

Issue 08 (2014-08-25)

Huawei Proprietary and Confidential

Summary of Contents for eSpace 8850


























































































Search results

Summary of Contents for eSpace 8850

Reviews:

Related manuals for eSpace 8850

Brands by name

Popular brands

Huawei eSpace 8850, User Manual

Search results

Summary of Contents for eSpace 8850

Reviews:

Related manuals for eSpace 8850

Brands by name

Popular brands