manualshive.com logo in svg

Huawei eSpace 7910, User Manual

Share
Download
Huawei eSpace 7910 User Manual Download Page 42

# as Dial

You can perform the following steps to set the pound key (#) as the Callout button:

Step 1

On the home screen, choose 

Apps

 > 

Buttons

.

Step 2

Select 

# as Dial

 and press 

Enable

 or 

Disable

.

----End

Redial Button

The Redial button allows you to redial the last dialed number. For details about how to set and
use the Redial button, see 

6.5.2 Placing Calls Using the Redial Button

.

4.1.7 Audio Source

The audio source refers to the audio source device that you use to place or receive a call after
pressing the 

Call

 or 

Answer

 softkey or a line button on the IP phone.

You can perform the following steps to set the audio source:

Step 1

On the home screen, choose 

Apps

 > 

Preferences

 > 

Audio Source

.

The 

Audio Source

 screen is displayed.

Step 2

Select 

Speaker

, 

Bluetooth earphone

, 

USB earphone

, or 

Headset(RJ-9)

.

NOTE

l

eSpace 7910 IP Phone does not support the Bluetooth headset or USB headset.

l

If your IP phone is not connected to a Bluetooth headset or USB headset, you can only select either
Speaker or Headset (RJ-9) as the audio source.

l

The RJ-9 headset PLANTRONICS HW111N-U10P is recommended.

l

eSpace 7950 IP Phone supports the following inline controls provided by a USB headset: /-,
off-hook/on-hook, and mute/unmute. The recommended USB headset models are Plantronics
BLACKWIRE 310, Plantronics BLACKWIRE 315, Plantronics BLACKWIRE 325, and Plantronics
BLACKWIRE 520.

Step 3

Press 

Select

.

----End

4.1.8 Theme

You can perform the following steps to set a theme:

Step 1

On the home screen, choose 

Apps

 > 

Preferences

 > 

Theme

.

Step 2

Select 

Classic

 or 

Simple

.

Step 3

Press 

Select

.

----End

4.2 System

eSpace 7910&7950 IP Phone
User Guide

4 Phone Settings

Issue 03 (2017-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

34

Summary of Contents for eSpace 7910
















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands