Huawei ES3000 V3 User Manual Download Page 54

Page: 54 / 209

Procedure

Step 1

Step 2

Go to the directory that stores the tool package, for example,

/home

Step 3

Run the installation command based on the OS type.

For RHEL, CentOS, OEL, or SLES, run

rpm -ivh tool package name

Example:

rpm -ivh hioadm-3.3.5.2-1.x86_64.rpm

For Ubuntu or Debian, run

dpkg -i tool package name

Example:

dpkg -i hioadm-3.3.5.2-1.amd64.deb

Step 4

Run the following command to obtain help information about the tool:

hioadm -h

hioadm --help

Step 5

Copy

linux/tool/ host_info_collect.sh

/opt/hio

----End

3.7.2 Installing the Tool Package (Windows)

Operation Scenario

Install the tool package for managing the ES3000 V3. The ES3000 V3 tool is incompatible
with the NVMe driver built in the Windows OS. Ensure that you have installed Huawei's
NVMe driver before using the tool.

Preparations

You have correctly installed the ES3000 V3 on the server.

You have downloaded the tool package and verified its integrity.

You have uploaded the tool package to the server by using Windows Secure Copy
(WinSCP) or other software.

Procedure

Step 1

Step 2

Double-click the tool package file

hioadm_v3.3.5.4_x86_64.msi

NOTE

v3.3.5.4 indicates a driver version number. This procedure uses hioadm_v3.3.5.4_x86_64.msi as an example.

The installation interface is displayed, as shown in

Figure 3-20

ES3000 V3 NVMe PCIe SSD
User Guide

3 Installation and Configuration

Issue 20 (2019-02-27)

Summary of Contents for ES3000 V3


















































































































































































































Search results

Summary of Contents for ES3000 V3

Reviews:

Related manuals for ES3000 V3

Brands by name

Popular brands

Huawei ES3000 V3, User Manual

Search results

Summary of Contents for ES3000 V3

Reviews:

Related manuals for ES3000 V3

Brands by name

Popular brands