Huawei ES3000 V3 User Manual Download Page 52

Page: 52 / 209

–

If yes, the driver has been successfully installed.

–

If no, contact

Huawei technical support

Figure 3-19

Expanding Disk drives

----End

3.6.3 Installing the ES3000 V3 Driver in ESXi

Operation Scenario

You need to install the ES3000 V3 driver on the server before using the ES3000 V3 for the
first time.

NOTE

If you install multiple ES3000 V3s on a server, you need to install the driver only once.

To install ESXi on the ES3000 V3, see

F Installing an OS on the ES3000 V3

Preparations

Before installing the ES3000 V3 driver, check that:

You have correctly installed the ES3000 V3 on the server.

You have downloaded the ES3000 V3 driver package to the server, and verified the
package integrity.

You have uploaded the driver package to the server by using WinSCP or other software.

Procedure

Step 1

Step 2

Install the ES3000 V3 driver.
The following procedure assumes that the driver package is in the

/tmp

directory, and the

driver package name is

hiodriver-3.3.5.2-1OEM.550.0.0.2768847.x86_64.vib

Run the following command to install the ES3000 V3 driver package:

esxcli software vib install -v driver package in a directory

The following is an example command:

esxcli software vib install -v /tmp/hiodriver-3.3.5.2-1OEM.550.0.0.2768847.x86_64.vib

ES3000 V3 NVMe PCIe SSD
User Guide

3 Installation and Configuration

Issue 20 (2019-02-27)

Summary of Contents for ES3000 V3


















































































































































































































Search results

Summary of Contents for ES3000 V3

Reviews:

Related manuals for ES3000 V3

Brands by name

Popular brands

Huawei ES3000 V3, User Manual

Search results

Summary of Contents for ES3000 V3

Reviews:

Related manuals for ES3000 V3

Brands by name

Popular brands