Manual do Usuário - EchoLife
ET325 IP Phone
4 Guia de Configuração
46
Campo
Descrição
Disable Direct
IP calls
The default value is No. When it is enabled, using IP
address to make direct IP calls is disabled.
Use Quick IP
Call mode
Dial an IP address under the same LAN/VPN segment by
entering the last octet in the IP address. This is in the
condition that no or not using SIP Proxy, to simulate the
function that PBX uses CMSA/CD.
In the Advanced Settings page, set
the
Use Quick IP-
call mode
option to
Yes
. When #*
XX
is dialed (
X
is
0–9
and
XXX
≤
255
), the phone will make direct IP call to
aaa.bbb.ccc.XXX
(
aaa.bbb.ccc
comes from the local IP
address regardless of the subnet mask).
#XX
or
#X
are both the valid dialing format, and the
leading
0
is not required.
Lock Keypad
Update
If it is set to
Yes
, some configuration changes (the
function options in [Config] except [Network]) through
keypad are disabled.
Headset TX
gain (dB)
Adjust the Headset (RJ22) TX gain, the value ranges
from
-6dB
to
6dB
. The default value is
0dB
.
Headset RX
gain (dB)
Adjust the Headset (RJ22) RX gain, the value ranges
from
-6dB
to
6dB
. The default value is
0dB
.
4.3.2 Individual Account Settings
The ET325 SIP account can be configured in the corresponding
option of the ACCOUNT page. Please configure the parameters
on your requirements.
