Manual do Usuário - EchoLife
ET325 IP Phone
4 Guia de Configuração
45
Campo
Descrição
Distinctive
Ring Tone
Custom ring tone 1–3.
Caller ID: When a ring tone is selected, if a caller ID is
configured, then the device will play only this ring tone
when the incoming call is the number of the set caller ID.
The device will use the system ring tone for all other
calls. When a ring tone is selected but no caller ID is
configured, the selected ring tone will be used for all
incoming calls.
System Ring
Tone
System ring tone: adopt the North American standard by
default.
The user can adjust the system ring tone's frequencies
and cadences based on their country's telecom standard.
Call Progress
Tones
These settings can be configured through various call
progress tone frequencies and cadences according to
the standard of country where the phone is located.
By default, call progress tones are set to North American
standard.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
frequencies are in Hz and cadence on and off are in
10ms.
Frequencies should be configured with known values to
avoid uncomfortable high pitch sounds.
ON
is the period
of ringing ("On time" in
ms
) while
OFF
is the period of
silence. In order to set a continuous ring,
OFF
should set
to zero. Otherwise it will ring
ON
ms and a pause of
OFF
ms and then repeat the pattern. Up to three cadences
are supported.
Disable Call
Waiting
The default value is
No
. When two phones establish a
conversation, the call waiting of a third party will be
disabled.
Disable Call
Waiting Tone
The default value is
No
. If it is set to
Yes
, the call waiting
tone will not be played to remind user when there is an
incoming call, and only a "RINGING" displays on the LED
as the reminder.
