Huawei DBU20B-N12A3 User Manual Download Page 3

Page: 3 / 70

DPU40D-N06A3, DBU20B-N12A3, and
DBU50B-N12A1 Distributed Power System
User Manual

About This Document

Issue 04 (2020-02-29)

About This Document

Purpose

This document describes the distributed power system in terms of overview, components,
maintenance, and technical specifications.

Figures provided in this document are for reference only.

Intended Audience

This document is intended for:



Sales engineers



Technical support engineers



Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not avoided,
will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not avoided,
could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal
injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.

Summary of Contents for DBU20B-N12A3







































































Search results

Summary of Contents for DBU20B-N12A3

Reviews:

Related manuals for DBU20B-N12A3

Brands by name

Popular brands

Huawei DBU20B-N12A3, User Manual

Search results

Summary of Contents for DBU20B-N12A3

Reviews:

Related manuals for DBU20B-N12A3

Brands by name

Popular brands