Huawei CX600-16, Hardware Description

Page: 77 / 132

Attribute Description
Cable specification Single-mode or multi-mode fibers
Table 3-18 lists the attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45 interfaces.
Table 3-18 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
Attribute Description
Connector type RJ45
Operation mode 10M/100M/1000M auto-sensing interfaces, supporting half-duplex and
full-duplex modes
Standard
compliance IEEE 802.3-2002
Cable
specification Category 5 unshielded twisted pair (UTP) cables recommended when the
interface rate is 10 Mbit/s or 100 Mbit/s; super category 5 Shielded
Twisted Pair (STP) cables recommended when the interface rate is 1000
Mbit/s
Table 3-19 lists the console interface attributes.
Table 3-19 Console interface attributes
Attribute Description
Connector type RJ45
Operation mode Duplex Universal Asynchronous Receiver/Transmitter (UART)
Electrical
attribute RS-232
Baud rate 9600 bit/s (default value), which can be changed as required
Data equipment
type Data Circuit-terminating Equipment (DCE)
Cable
specification 8-core shielded cable
Table 3-20 lists the AUX interface attributes.
HUAWEI CX600-8/16/X3/X8/X16 Metro Service Platform
Hardware Description
3 CX600-X16
Issue 03 (2013-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
58