Quidway® NetEngine 40 Series Universal Switching Router Route Switching Units
Copyright ©2007 Huawei Technologies Co., Ltd. All rights reserved.
http://www.huawei.com/products/datacomm/
3
Refer to the table below for details.
Module
name
Interface
name
Interface
type
Description
Ethernet
port
RJ45
Connect the NM station. This interface is
10/100 Mbps adaptive and supports a
maximum transmission distance of 100m. It
is configured with LINK and ACT indicators.
CONSOLE
port
RJ45
It is of RS-232 level and used to connect
with the console for onsite configuration,
maintenance, management and upgrade of
system.
AUX port
RJ45
It is of RS-232 level and used to connect
with the Modem for remote configuration,
maintenance and management by means of
dialing.
CLK-IN1
CLK-IN2
SMB
Receive 2.048 MHz or 2.048 Mbps clock
signals.
CLK-OUT1
CR-SRUB/
CR-SRUC
CLK-OUT2
SMB
Send 2.048 MHz or 2.048 Mbps clock
signals to downstream devices.
Ethernet
port
RJ45
Connect the NM station. It is 10/100/1000
Mbps adaptive and supports a maximum
transmission distance of 100m. It is
configured with LINK and ACT indicators.
CONSOLE
port
RJ45
It is of RS-232 level and used to connect
with the console for onsite configuration,
maintenance, management and upgrade of
system.
AUX port
RJ45
It is of RS-232 level and used to connect
with the Modem for remote configuration,
maintenance and management by means of
dialing.
CLK-IN1
CLK-IN2
SMB
Receive 2.048 MHz or 2.048 Mbps clock
signals.
CR-SRUE
CLK-OUT1 SMB Send 2.048 MHz or 2.048 Mbps clock
