background image

  Quidway® NetEngine 40 Series Universal Switching Router Route Switching Units 

 

Copyright ©2007 Huawei Technologies Co., Ltd. All rights reserved. 

http://www.huawei.com/products/datacomm/

 

2

 

The SRU consists of main processing unit (MPU), switching fabric unit (Fabric) and clock 

module (CLK). As the core of system control and management, SRU also serves as system 

clock source and maintenance and management unit. It implements the functions of the 

control plane, switching plane and system maintenance plane.   

Below follows a description of functions.   

I. MPU 

z

 

Process routing protocols, generate and sent forwarding tables to line 

boards.  

z

 

Conduct system management and performance monitoring as commanded 

and feed back the information of system running to the operator.   

z

 

Monitor and maintain the running of LPU.   

z

 

Monitor and maintain the running of Fabric and CLK.   

z

 

Monitor the running of the fan system and power system.   

II. Fabric 

z

 

Support non-blocking and automatic routing data exchange.   

z

 

Support dynamic sharing of output buffer.   

z

 

Support multi-priority switching.   

z

 

Support multicast switching.   

z

 

Support hardware flow control and back pressure.   

z

 

The temperature sensor tests the temperature of the SRU. It can also collect 

and report temperature information and generate related alarms.   

III. CLK 

z

 

Provide a standard level-3 synchronization clock with the clock reference 

source (2048 Kbit/s or 2048 KHz).   

z

 

Support clock priority.   

z

 

Have four working modes: fast tracking, normal (tracking), hold and free-run. 

z

 

Have rough tune and fine tune function, realizing on-site frequency 

adjustment.  

z

 

Enable synchronization performance detection, alarming and control. 

Specifications 

At present, the NE40 provides three types of SRUs, including CR-SRUB, CR-SRUC and 

CR-SRUE.  

Compared with first-generation SRUs of CR-SRUB and CR-SRUC, CR-SRUE demonstrates 

much better performance. CR-SRUB and CR-SRUE are applicable to NE40-8, NE40-4 and 

NE40-2, while the CR-SRUC is only applicable to NE40-2.   

In addition, the CR-SRUE provides 10/100/1000 Mbps Ethernet interface while CR-SRUB and 

CR-SRUC provide 10/100 Mbps Ethernet interface.   

Summary of Contents for CR-SRUB

Page 1: ... can be located It is suggested that you configure two SRUs in order to implement SRU redundancy and enhance system reliability NE40 2 has only one SRU slot so it does not support SRU redundancy CR SRUB CR SRUE When the active SRU runs normally the standby one is backing up such information in real time as data configuration and status of slot board interface power fan and protocol When the active...

Page 2: ...omatic routing data exchange z Support dynamic sharing of output buffer z Support multi priority switching z Support multicast switching z Support hardware flow control and back pressure z The temperature sensor tests the temperature of the SRU It can also collect and report temperature information and generate related alarms III CLK z Provide a standard level 3 synchronization clock with the cloc...

Page 3: ...onnect with the Modem for remote configuration maintenance and management by means of dialing CLK IN1 CLK IN2 SMB Receive 2 048 MHz or 2 048 Mbps clock signals CLK OUT1 CR SRUB CR SRUC CLK OUT2 SMB Send 2 048 MHz or 2 048 Mbps clock signals to downstream devices Ethernet port RJ45 Connect the NM station It is 10 100 1000 Mbps adaptive and supports a maximum transmission distance of 100m It is conf...

Page 4: ...al Switching Router Route Switching Units Copyright 2007 Huawei Technologies Co Ltd All rights reserved http www huawei com products datacomm 4 Module name Interface name Interface type Description CLK OUT2 signals to downstream devices ...

Reviews: