background image

28

7

Safety Information

This section contains important information pertaining 
to the operating instructions of your device. It also 
contains information about how to use the device 
safely. Read this information carefully before using 
your device.

 

Electronic Device

Do not use your device if using your device is 
prohibited. Do not use the device when using your 
device causes danger or interference with electronic 
devices.

 

Medical Device

• Follow rules and regulations set forth by hospitals 

and health care facilities. Do not use your device 
when using the device is prohibited. 

• Some wireless devices may affect the performance 

of hearing aids or pacemakers. For any such 
problems, consult your service provider.

• If you are using an electronic medical device, 

consult the doctor or the device manufacturer to 
confirm whether radio waves affect the operation of 
this device.

 

Potentially Explosive Atmospheres

Do not use your device in any area with a potentially 
explosive atmosphere, and comply with all signs and 
instructions. Areas that may have potentially 
explosive atmospheres include the areas where you 
would normally be advised to turn off your vehicle 

engine. Triggering of sparks in such areas could 
cause an explosion or a fire, resulting in bodily 
injuries or even deaths. Do not use your device at 
refueling points such as service stations. Comply with 
restrictions on the use of radio equipment in fuel 
depots, storage, and distribution areas, and chemical 
plants. In addition, adhere to restrictions in areas 
where blasting operations are in progress. Before 
using the device, watch out for areas that have 
potentially explosive atmospheres that are often, but 
not always, clearly marked. Such locations include 
areas below the deck on boats, chemical transfer or 
storage facilities, and areas where the air contains 
chemicals or particles such as grain, dust, or metal 
powders. Ask the manufacturers of vehicles using 
liquefied petroleum gas (such as propane or butane) 
whether this device can be safely used in their 
vicinity.

 

Traffic Security

• Observe local laws and regulations while using the 

device. To prevent accidents, do not use your 
wireless device while driving.

• RF signals may affect electronic systems of motor 

vehicles. For more information, consult the vehicle 
manufacturer.

• In a motor vehicle, do not place the device over the air 

bag or in the air bag deployment area. Otherwise, the 

Summary of Contents for B970b







































Reviews: