manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 21

Figure 2-2

 Searching commands based on a specific level

2.1.3 Command Line Views

The command line interface has different command views. All the commands are registered in
one or more command views. You can run a command only when you enter the corresponding
command view.

The following part uses the user, system, and aaa views as an example:

# Establish connection to the router. If the router adopts the default configuration, you can enter
the user view with the prompt of <Huawei>.

<Huawei>

# Run the 

system-view

 command to enter the system view.

<Huawei> 

system-view

[Huawei]

# Run the 

aaa

 command in the system view to enter the AAA view.

[Huawei] 

aaa

[Huawei-aaa]

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

2 CLI Overview

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

10

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands