manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 150

After the configuration, the source IP address of the TFTP client displayed on the TFTP server
must be the same as the configured one.

----End

8.5.3 (Optional) Configuring TFTP Access Authority

This section describes how to use an ACL rule to authorize the users to specify the TFTP servers
that can be accessed by using TFTP from the router that you have logged in to.

Context

An Access Control List (ACL) is a set of sequential rules. These rules are described based on
the source address, destination address, and port number of a packet. Routers use the ACL rules
to filter packets. With the rule applied to the interface on a router, the router permits or denies
the packets.

Each ACL can define multiple rules. ACL rules are classified into the interface ACL, basic ACL,
and advanced ACL based on the functions of ACL rules.

NOTE

TFTP supports only the basic ACL (whose number ranges from 2000 to 2999).

Do as follows on the router that serves as the TFTP client:

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

acl

 

acl-number

The ACL view is displayed.

Step 3

Run:

rule

 [ 

rule-id

 ] { 

deny

 | 

permit

 } [ { 

fragment

 | 

none-first-fragment

 } | 

source

 

{ 

source-address source-wildcard

 | 

any

 } | 

time-range

 

time-name

 | 

vpn-instance

 

vpn-

instance-name

 ] 

*

The ACL rule is configured.

Step 4

Run:

quit

The system view is displayed.

Step 5

Run the 

tftp-server acl

 

acl-number

 command. You can use the ACL to limit the access to the

TFTP server.

----End

8.5.4 Downloading Files by Using TFTP

You can download files from the TFTP server to the TFTP client.

Do as follows on the router that serves as the TFTP client:

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

8 Accessing Another Device

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

139

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands