manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 145

8.4 Logging in to other Device by Using STelnet

STelnet ensures secure Telnet services. You can log in to another router from the router that you
have logged in to by using STelnet, and thus to manage the device remotely.

8.4.1 Establishing the Configuration Task

Before establishing the configuration task of logging in to another device by using Stelnet,
familiarize yourself with the applicable environment, complete the pre-configuration tasks, and
obtain the required data. This can help you complete the configuration task quickly and
accurately.

Applicable Environment

Logins by using Telnet bring security risks because no secure authentication mechanism is
available and data is transmitted by using TCP in plain text mode.

STelnet is short for SSH Telnet that is a secure Telnet protocol. STelnet is on the basis of SSH.
SSH users can use STelnet services as Telnet services.

In this configuration, the Router that you have logged in to functions as a Telnet client, and
theRouter that you attempt to log in to functions as an SSH server.

Pre-configuration Tasks

Before logging in to another device by using STelnet, complete the following tasks:

l

Configuring a reachable route between the client and SSH server

Data Preparation

To log in to another device by using STelnet, you need the following data:

No.

Data

1

Name of the SSH server,Public key that is assigned by the client to the SSH server

2

IPv4 address or host name of the SSH server,Number of the port monitored by the
SSH server,Preferred encrypted algorithm from the SFTP client to the SSH
server,Preferred encrypted algorithm from the SSH server to the SFTP
client,Preferred HMAC algorithm from the SFTP client to the SSH server,Preferred
HMAC algorithm from the SSH server to the SFTP client,Preferred algorithm of key
exchange
The user information for logging in to the SSH server

 

8.4.2 Configuring the First Successful Login to Another Device
(Enabling the First-Time Authentication on the SSH Client)

After the first-time authentication on the SSH client is enabled, the STelnet client does not check
the validity of the RSA public key when logging in to the SSH server for the first time.

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

8 Accessing Another Device

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

134

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands