manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 140

Procedure

l

Run:

telnet

 [ 

vpn-instance

 

vpn-instance-name

 ] [

-a

 

source-ip-address

 ] 

host-name

 

[ 

port-number

 ]

Log in to the router and manage other routers.

----End

8.2.4 Checking the Configuration

When you log in to another router successfully from the router that you have logged in to, you
can check information about the established TCP connection.

Prerequisite

All configurations for logging in to another device are complete.

Procedure

l

Run the 

display tcp status

 command to check the status of all TCP connections.

----End

Example

Run the 

display tcp status

 command to view the status of TCP connections. The 

Established

status indicates that a TCP connection has been established.

<Huawei> 

display tcp status

TCPCB      Tid/Soid    Local Add:port         Foreign Add:port       VPNID      State
39952df8   36 /1509     0.0.0.0:0               0.0.0.0:0              0        
Closed
32af9074   59 /1        0.0.0.0:21              0.0.0.0:0              14849    
Listening
34042c80   73 /17       10.164.39.99:23         10.164.6.13:1147       0        

Established

8.3 Using the Redirection Function to Connect to a Remote
Device

To manage a remote device that can transmit data only through a serial interface, configure the
redirection function on the AR2200.

8.3.1 Establishing the Configuration Task

Before configuring the redirection function, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the data required for the
configuration. This will help you complete the configuration task quickly and accurately.

Applicable Environment

To manage a remote device that can transmit data only through a serial interface, configure the
redirection function on the AR2200.

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

8 Accessing Another Device

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

129

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands