manualshive.com logo in svg

Huawei AR2200 Series, Configuration Manual

Share
Download
Huawei AR2200 Series Configuration Manual Download Page 129

No.

Data

1

System software and its file name on the AR2200

2

Configuration file and its file name on the AR2200

 

7.3.2 Configuring System Software for a router to Load for the Next
Startup

To upgrade the system software of a router, you can specify the AR2200 system software to be
loaded for the next startup.

Context

If no system software is specified for the next startup operation of the router, the system software
loaded this time will be started during the next startup operation. To change system software for
the next startup operation, you need to specify the required one.

The filename extension of the system software must be 

.cc

 and must be stored in the root directory

of a storage device.

Procedure

Step 1

Run:

startup system-software

 

filename

The AR2200 system software for the router to load next time when it starts is configured.

----End

7.3.3 Configuring the Configuration File for Router to Load for the
Next Startup

Before restarting a router, you can specify the configuration files that are loaded for the next
startup.

Context

You can run the 

display startup

 command on the router to check whether the configuration file

to be loaded during the next startup operation is specified. If no configuration file is specified,
the default configuration file is loaded during the next startup operation.

The filename extension of the configuration file must be 

.cfg

 or 

.zip

, and must be stored in the

root directory of a storage device.

When the router turns on, it initiates by reading the configuration file from the flash memory by
default. Thus, the configuration in this configuration file is called initial configuration. If no
configuration file is saved in the flash, the router initiates with default parameters.

Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration

7 Configuring System Startup

Issue 02 (2011-10-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

118

Summary of Contents for AR2200 Series




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands