manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 66 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 66

The interface view is displayed.

Step 3

Run:

zone

 

zone-name

The interface is added to the zone.

----End

3.3.4 Creating an Interzone

Create the interzone so you can enable the firewall to filter packets or application-layer services
in the specified interzone.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

firewall interzone

 

zone-name1

 

zone-name2

An interzone is created.

The zones specified for an interzone must have been created on the device.

----End

3.3.5 Enabling Firewall in the Interzone

The configured firewall functions take effect only after you enable firewall in the interzone.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

firewall interzone

 

zone-name1

 

zone-name2

The interzone view is displayed.

The zones 

zone-name1

 and 

zone-name2

 have been created through the 

firewall zone

 command.

Step 3

Run:

firewall enable

The firewall is enabled.

By default, the firewall function is disabled in an interzone.

----End

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

3 Firewall Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

52

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments