manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 263 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 263

l

If CRL is used for certificate check, CRLs are automatically downloaded from a CA server
during each certificate check. To use CRL to check a certificate, perform the following
operations according to networking requirements:

–

Run:

cdp-url

 

cdp-url

A CRL distribution point (CDP) URL used to obtain the CRL issued by a CA is
configured.
Certificates issued by the CA contain the CDP information, specifying how and where
to obtain the CRL. A PKI entity uses the method specified in the CDP information to
download the CRL.
If the CDP URL is configured in the PKI domain, the PKI entity obtains the CRL from
the specified URL.

–

Run:

crl cache

The AR1200-S is configured to use the buffered CRL for certificate check, without
having to download the CRL from the CA.

–

Run:

crl update-period

 

hours

The interval at which a PKI entity downloads a CRL from a CRL storage server is
configured.

–

Run:

quit

Return to the system view.

–

If the PKI entity suspects that the CRL expires, run:

pki get-crl

 

pki-realm-name

The AR1200-S is configured to download the latest CRL from the CA.

l

To use OCSP for certificate check, perform the following operation:

–

Run:

ocsp-url

 

ocsp-url

The OCSP server's URL is configured.
This URL will override the OCSP server's address in the certificate.

----End

12.6.3 Checking Certificate Validity

After the certificate validity check mode is configured, you can check certificate validity.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

pki validate-certificate

 { 

ca

 | 

local

 } 

pki-realm-name

The CA certificate validity or local certificate validity is checked.

----End

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

12 PKI Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

249

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments