manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 236 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 236

By default, a maximum of 128 sessions can be saved, and the timeout period of a saved session
is 3600s.

Step 5

(Optional) Run:

ciphersuite

 { 

rsa_aes_128_cbc_sha

 | 

rsa_des_cbc_sha

 | 

rsa_rc4_128_md5

 | 

rsa_rc4_128_sha

 } 

*

A cipher suite is specified.

By default, a server SSL policy supports all the cipher suites: rsa_aes_128_cbc_sha,
rsa_des_cbc_sha, rsa_rc4_128_md5, and rsa_rc4_128_sha.

----End

Example

# Run the 

display ssl policy

 

policy-name

 command to view the configuration of the SSL policy

server-users

.

<Huawei> 

display ssl policy server-users

 ------------------------------------------------------------------------------
  Policy name                     :   server-
users                                     
  Policy ID                       :   1                                         
  Policy type                     :   Server                                    
  Cache number                    :   128                                       
  Time out(second)                :   3600                                      
  Server certificate load status  :   
loaded                                         
  Bind number                     :   1                                         
  SSL connection number           :   1                                         
  --------------------------------------------------------------------------

11.4 Configuring a Client SSL Policy

A client SSL policy defines the parameters that an SSL client uses in SSL handshakes, including
the PKI domain name, SSL protocol version, and cipher suite.

Prerequisites

The PKI domain has been configured.

Applicable Environment

The SSL protocol uses data encryption, identity authentication, and message integrity check to
ensure security of TCP-based application layer protocols. To use an AR1200-S as an SSL client,
configure a client SSL policy on the AR1200-S. A client SSL policy can be applied to application
layer protocols such as the CPE WAN Management Protocol (CWMP) to provide secure
connections.

Figure 11-3

 AR1200-S functions as an SSL client

Internet

SSL server

SSL client

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

11 SSL Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

222

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments