manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 214 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 214

l

Run the 

rule

 command with 

rule-id

 specified to add a new rule between existing rules when

the configuration order is used.

10.4.5 Applying an Advanced ACL

An advanced ACL can be applied to some services and functions to classify packets.

Prerequisites

An advanced ACL has been created and rules have been configured in the advanced ACL.

Context

An advanced ACL can be applied to the following services and functions:

l

Traffic classifier

l

Blacklist for local attack defense

l

IP multicast

l

IPSec

l

Firewall

l

NAT

l

Packet filtering on an interface

Procedure

l

Apply an advanced ACL to a traffic classifier.

To provide differentiated services based on packet information, configure traffic classifiers.
Advanced ACLs can be referenced by traffic classifiers to define rules for classifying
traffic. For details, see Configuring a Traffic Classifier.

l

Apply an advanced ACL to add specified users to the blacklist for local attack defense.

A blacklist is a set of unauthorized users. The AR1200-S uses advanced ACLs to add users
with a specific characteristic to a blacklist and discards the packets from the users in the
blacklist. For details, see 

9.4.3 (Optional) Configuring a Blacklist

.

l

Apply an advanced ACL to IP multicast.

Certain functions of the Internet Group Management Protocol (IGMP), Protocol
Independent Multicast-Dense Mode (PIM-DM) and Protocol Independent Multicast-
Sparse Mode (PIM-SM) need to reference advanced ACLs. For details, see Configuration
Guide - Multicast.

l

Apply an advanced ACL to IPSec.

The IP Security (IPSec) protocol family is a series of protocols defined by the Internet
Engineering Task Force (IETF). This protocol family provides high quality, interoperable,
and cryptology-based security for IP packets. IPSec peers can use various security
protection measures (authentication, encryption, or both) on different data flows. The
AR1200-S can use advanced ACLs to define data flows. For details, see IPSec
Configuration.

l

Apply an advanced ACL to a firewall.

The attack defense system protects an internal network against attacks from external
networks. Generally, firewalls are deployed between the internal and external networks to

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

10 ACL Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

200

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments