manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 203 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 203

10.3.2 (Optional) Creating a Time Range for a Basic ACL

To make a basic ACL take effect during a specified period of time, create a time range and
reference the time range in the basic ACL. If no time range is specified for the ACL, the ACL
remains effective until it is deleted or the rules of the ACL are deleted.

Context

Some services or functions that reference basic ACLs need to be started during a specified period
of time, for example, QoS needs to be started during peak hours. You can create a time range
and reference the time range in a basic ACL so that the basic ACL takes effect in the time range.
The service or function that references the basic ACL is also started in the specified time range.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

time-range

 

time-name

 { 

start-time

 

to

 

end-time

 

days

 | 

from

 

time1

 

date1

 [ 

to

 

time2

 

date2

 ] }

A time range is created.

To configure multiple time ranges with the same name on the AR1200-S, run the preceding
command with the same value of 

time-name

 multiple times.

NOTE

You can configure the same name for multiple time ranges to describe a special period. Assume that the same
name 

test

 is configured for the following time ranges:

l

Time range 1: 2010-01-01 00:00 to 2010-12-31 23:59 (absolute time range)

l

Time range 2: 8:00 to 18:00 from Monday to Friday (periodic time range)

l

Time range 3: 14:00 to 18:00 on Saturday and Sunday (periodic time range)

The time range 

test

 includes 8:00-18:00 on Monday to Friday and 14:00-18:00 on Saturday and Sunday in 2010.

----End

Follow-up Procedure

Reference the time range in a basic ACL rule.

10.3.3 Creating a Basic ACL

Before using a basic ACL, ensure that the basic ACL has been created. You can create a named
or numbered basic ACL.

Prerequisites

The 

display acl

 

all

 command has been executed to view all the configured ACLs. This prevents

duplicate basic ACLs from being configured.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

10 ACL Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

189

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments