manualshive.com logo in svg

Huawei AR1200-S Series, Configuration Manual, Page: 129 / 308

Share
Download
Huawei AR1200-S Series Configuration Manual Download Page 129

5.4.5 (Optional) Configuring a Domain for MAC Address
Authentication

The 

default

 authentication domain is used when no authentication domain is configured.

Context

A domain for MAC address authentication can be configured in the interface view or system
view. A domain configured in the interface view takes priority over that configured in the system
view.

Procedure

l

Configuring a domain in the system view
1.

Run:

system-view

The system view is displayed.

2.

Run:

mac-authen domain

 

domain-name

A domain name is configured for MAC address authentication.

By default, the default domain is used for MAC address authentication.

l

Configuring a domain in the interface view
1.

Run:

system-view

The system view is displayed.

2.

Run:

interface

 

interface-type

 

interface-number

The interface view is displayed.

3.

Run:

mac-authen domain

 

domain-name

A domain name is configured for MAC address authentication.

By default, the default domain is used for MAC address authentication.

----End

5.4.6 (Optional) Setting Values for MAC Address Authentication
Timers

The following values can be set on the AR1200-S: re-authentication interval, interval for
detecting whether users are online, value of the quiet timer, and value of the timeout timer of
the authentication server.

Context

Generally, timers used in MAC address authentication retain the default values.

Huawei AR1200-S Series Enterprise Routers
Configuration Guide - Security

5 NAC Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

115

Summary of Contents for AR1200-S Series





















































































































































































































































































































Reviews:

No comments