Huawei ACBox2000-21-D-A User Manual Download Page 6 | Manualshive

Page: 6 / 50

background image

ACBox2000-21-D-A
User Manual (Pan-Europe Edition)

1 Safety Precautions

Issue 01 (2016-12-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

1

1

Safety Precautions

General Safety

Huawei equipment can be installed, operated, and maintained only by personnel who have
received a thorough training, understood all necessary safety precautions, and are able to
correctly perform all operations.



Only trained and qualified personnel are allowed to install, operate, and maintain Huawei
equipment.



Only qualified personnel are allowed to remove safety facilities and inspect the
equipment.



Only personnel certified or authorized by Huawei are allowed to replace devices or
components (including software).



Any fault or error that might cause safety problems must be reported immediately to a
supervisor.

Read this document thoroughly before operations. Huawei shall not be liable for any
consequence caused by violation of the storage, transportation, installation, and operation
regulations specified in this document.

The safety precautions provided in this document do not cover all the safety precautions.
Huawei will not be liable for any consequence caused by the violation of the safety operation
regulations and design, production, and usage standards.

Local Laws and Regulations

When operating Huawei equipment, you must follow the local laws and regulations. The
safety instructions in this document are only supplements to local laws and regulations.

Grounding Requirements

Comply with the following requirements for devices to be grounded:



When installing a device, install the ground cable first. When removing a device, remove
the ground cable at the very end.

«
...
4
5
6
7
8
...
»

Summary of Contents for ACBox2000-21-D-A



















































Reviews:

No comments

Related manuals for ACBox2000-21-D-A

Brand: Vector Pages: 6

Guard Master 440N-Z2NRS1A

Brand: Allen-Bradley Pages: 4

LiteWave LS105G

Brand: TP-Link Pages: 3

Brand: Black Box Pages: 31

iBootBar iBB-DC8

Brand: Dataprobe Pages: 36

Brand: Lantech Pages: 24

Brand: Cypress Pages: 4

Brand: Black Box Pages: 44

Brand: Qlogic Pages: 412

Brand: Kramer Pages: 29

Brand: Niles Pages: 2

CONNECTION PERFECTION 32797

Brand: Lindy Pages: 10

Brand: QNAP Pages: 30

Brand: SALZ Pages: 2

Brand: Shenzhen Kinan Technology Pages: 27

Brand: NETGEAR Pages: 2

MPD-DS-WML-NFDS Series

Brand: Larson Electronics Pages: 2

MISCOM8028GX-4XGF-16GF-8GC

Brand: Maiwe Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands