Huawei AAU3940 Hardware Maintenance Manual Download

Page: 3 / 25

About This Document

Overview

This document describes routine maintenance for an AAU3940 such as equipment maintenance
and power-on and power-off operations. It also describes how to replace the AAU, modules in
it, and optical modules.

Product Version

The following table lists the product versions related to this document.

Product Name

Solution Version

Product Version

DBS3900

SRAN10.0 and later

RAN17.0 and later

eRAN8.0 and later

V100R010C00 and later

Intended Audience

This document is intended for:

Base station installation personnel

System engineer

Site maintenance personnel

Organization

1 Changes in AAU3940 Hardware Maintenance Guide

This chapter describes changes in

AAU3940 Hardware Maintenance Guide

2 Routine Hardware Maintenance Items

Routine hardware maintenance for an AAU improves reliability of the AAU. You are advised
to perform routine hardware maintenance yearly.

3 Powering On and Powering Off an AAU

AAU3940
Hardware Maintenance Guide

About This Document

Issue 01 (2015-01-15)

Huawei Proprietary and Confidential

Summary of Contents for AAU3940


























Search results

Summary of Contents for AAU3940

Reviews:

Related manuals for AAU3940

Brands by name

Popular brands

Huawei AAU3940, Hardware Maintenance Manual

Search results

Summary of Contents for AAU3940

Reviews:

Related manuals for AAU3940

Brands by name

Popular brands