Huawei 9000 VCT V100R011 Administrator'S Manual Download Page 157

Page: 157 / 204

Prerequisites

Before importing, a root certificate (in .pem format) must be downloaded from a SIP server or
a certificate authority locally.

Context

Certificates identify the users, certificate authorities, and servers, increasing communication
security.

Procedure

Step 1

Choose

System Settings

Import Certificate

Step 2

Click

Select File

, select the certificate to the imported, and click

Import

NOTE

The terminal supports importing of server certificates. To import a server certificate, select

Server certificate

: Select this to check whether the server to be accessed is secure and reliable.

Step 3

After

is displayed, click

Back

to exit the current page.

----End

10.4.9 Recording

The terminal can record conferences where the local site is the chair site.

Prerequisites

The recording server is online.

NOTE

Check the recording server's online status from ResourceManager (RM).

The terminal is in a multipoint conference hosted by a standalone MCU (such as the
HUAWEI VP8660 MCU).

The ongoing multipoint conference supports recording.

The local site is the chair site.

Context

The terminal for recording conferences must meet the following requirements:

On terminals with built-in MCUs,

Built-in MCU

is disabled.

When the terminal uses a standalone MCU to schedule or initiate multipoint conferences,
the conference parameters are set as follows:

–

Conference line type

is set to

H.323

SIP

4E1

, or

Auto

. To set

Conference line

type

, see

5.3 Setting Conference Parameters

–

Support recording

is selected.

Procedure

Step 1

Choose

Conference

Control Recording

HUAWEI 9000 HD Video Terminal
Administrator Guide

10 Remote Management from the Web Interface

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

145

Summary of Contents for 9000 VCT V100R011













































































































































































































Search results

Summary of Contents for 9000 VCT V100R011

Reviews:

Huawei 9000 VCT V100R011, Administrator'S Manual, Page: 157 / 204

Search results

Summary of Contents for 9000 VCT V100R011

Reviews: