Huawei 5288 V5 Acceptance Manual Download Page 16 | Manualshive

Page: 16 / 29

Huawei 5288 V5 Acceptance Manual Download Page 16

6. Record information such as CPU models and quantity and

DIMM vendor, quantity, and capacity displayed on the BIOS
screen. Check whether the displayed models and quantity are
the same as those recorded in section 4.1.1.

7. Press

F9

to restore default settings, and then press

F10

to save

the settings and exit.

Expected Results

The server is properly powered on and the BIOS screen is
displayed. The component information displayed on the BIOS is
the same as that recorded in section 4.1.1.

Test Result

Remarks

4.1.5 Configuring a RAID Array for Hard Disks

Case No.

4.1.5

Test Objective

To verify that a RAID array can be configured for hard disks on the
server.

Test Networking
Diagram

N/A

Prerequisites

The server is powered on.

Procedure

NOTE

Before installing an OS for the server, configure a RAID array as required. For
example, configure RAID 1 if the server has two hard disks, or RAID 5 if the
server has three or more hard disks.

Create a RAID array using a controller card supported by the server.
For details, see the

Huawei V5 Server RAID Controller Card User

.

Expected Results

A RAID array is successfully configured.

5288 V5 Server
Acceptance Guide

4 Test Cases and Records

Issue 03 (2019-03-25)

Copyright © Huawei Technologies Co., Ltd.

11

«
...
14
15
16
17
18
...
»

Summary of Contents for 5288 V5






























Reviews:

No comments