manualshive.com logo in svg

Huawei 3900 Series, Commissioning Manual

Introducing the Huawei 3900 Series - a cutting-edge solution for all your technological needs. This exceptional product offers unparalleled performance and functionality. Enhance your experience with our easy-to-use Solution Manual, available for free download at manualshive.com. Discover the limitless possibilities of the Huawei 3900 Series today!

Share
Download
background image

Table 5-2

 Item list of the NodeB commissioning procedure

Commissionin
g Item

Description

Detecting the
OM channel

When the transmission network is functional, the M2000 automatically
sets up the OM channel with the NodeB according to the NodeB
deployment list. The OM channel is used to commission and maintain the
NodeB.
After the OM channel is set up, the M2000 automatically sets 

Special

Status

 of the NodeB to 

Testing

, so that the invalid alarms can be shielded

during commissioning.

Upgrading the
software and
configuration

According to the version information in the NodeB deployment list, the
M2000 automatically checks whether the current NodeB version is the
same as the target version. If the current NodeB version differs from the
target software version, the target software and data configuration file are
downloaded from the server to the NodeB and activated automatically.

NOTE

If the USB disk is used for the upgrade on the NodeB side, and the NodeB software
and data configuration file are upgraded to the target version, the M2000 skips this
step and proceeds with the automatic software commissioning.

Monitoring the
software
commissioning

The purpose of software commissioning is to verify the services. Software
commissioning starts automatically. During the commissioning, only
faults need to be noted. All the reported alarms are displayed on the
monitoring interface of the M2000. In addition, the fault diagnosis access
that facilitates quick fault location is available, and the associated handling
suggestions are provided.

Verifying the
services

When detecting that the logical cell of the NodeB is available, the
M2000 starts service verification. The M2000 determines whether service
verification succeeds according to key performance counters, and then
displays the results.

Completing the
NodeB
deployment

After a NodeB passes the service verification, the status of the
commissioning task changes to 

Waiting for Acknowledgement

. When

the user acknowledges the completion of commissioning tasks, the
M2000 automatically cancels the 

Testing

 state of the NodeB and verifies

the NodeB location.

NOTE

l

Cancel the 

Testing

 state of the NodeB and resume the alarm reporting of the

NodeB.

l

NodeB location verification refers to the process in which the M2000
automatically checks whether the ESN reported by the NodeB is the same as the
ESN in the NodeB deployment list. Through the NodeB location verification,
you can check whether the USB disk for upgrade is the correct one in IP
networking mode.

 

3900 Series Multi-Mode Base Station
Commissioning Guide

5 Commissioning the MBTS in GL or UL Mode on the

M2000

Issue 02 (2010-07-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

5-23

Summary of Contents for 3900 Series





































































































































































































Reviews:

No comments

Related manuals for 3900 Series

Gates XA10 Setup, Use And Care Manual preview
XA10
Brand: Gates Pages: 26
Delta BIESEMEYER 78-955 Instruction Manual preview
BIESEMEYER 78-955
Brand: Delta Pages: 12
Camtree MB-20 Assembly Manual preview
MB-20
Brand: Camtree Pages: 2
Camtree G-PM Instruction Manual preview
G-PM
Brand: Camtree Pages: 11
Camtree G-51 Assembly Manual preview
G-51
Brand: Camtree Pages: 4
Oki C9200 User Manual preview
C9200
Brand: Oki Pages: 2
Oki B4400 Series Installation Instructions preview
B4400 Series
Brand: Oki Pages: 4
Tascam US-1641 Release Notes preview
US-1641
Brand: Tascam Pages: 4
Tascam US-125M Quick Start Manual preview
US-125M
Brand: Tascam Pages: 2
Tascam US-122MKII Release Note preview
US-122MKII
Brand: Tascam Pages: 4
Tascam US-122MKII Owner'S Manual preview
US-122MKII
Brand: Tascam Pages: 32
Tascam iXZ Owner'S Manual preview
iXZ
Brand: Tascam Pages: 2
Tascam FW-1884 Service Manual preview
FW-1884
Brand: Tascam Pages: 27
Tascam FW-1884 Supplementary Manual preview
FW-1884
Brand: Tascam Pages: 8
Tascam FW-1082 Owner'S Manual preview
FW-1082
Brand: Tascam Pages: 36
Veeder-Root HydrX Replacement Instructions preview
HydrX
Brand: Veeder-Root Pages: 2
Kelvion TEC1 Installation & Maintenance preview
TEC1
Brand: Kelvion Pages: 30
Aroflora Pluglia Instructions For Use Manual preview
Pluglia
Brand: Aroflora Pages: 36

Brands by name

Popular brands

Load more brands