01
01
Step 2 Install the Keyboard Tray Support [01] to the Bottom of Desktop
Step 3 Secure Keyboard Tray [02] to Keyboard Tray Support [01]
ø5/64 in. (2mm)
25/32 in. (20mm)
ø5/64 in. (2mm)
19/32 in. (15mm)
2-1
Phillips
Screwdriver
(Not Included)
Tighten
Loosen
①. Slightly loosen the pre-assembled
spanner [S], then lift and rotate the
part [01A] to the angle as shown in
fig a.
②. Retighten the pre-assembled
spanner [S]
③. Continue to rotate
the part [01A] and
slightly push it backward
as shown in the fig b.
Install the keyboard tray support
[01] under the table with screws
[A or D] and washers [B], then
tighten the screws.
HEAVY!
You may need
assistance with this step.
Phillips Screwdriver
(Not Included)
- 2 -
B
C
A/D
Select [A or D] screws according
to the thickness of the desktop. If
it is difficult to install the screws
[A/D], you can drill the pilot holes
using electric driver.
S
Fig a.
Fig b.
03
02
01A
01B
01A
01A
2-2
Electric Driver
(Not Included)
Screw A
Screw D