07
Step 5 Hang the Monitor to the Stand
Step 6 Adjust the Tilt Angle and Manage the Cables
F
F2
Small Allen Key
Warning:
To avoid tipping, please be careful not to extend the monitor too far
backward. When you adjust the angle of the monitor, please make
sure the monitor is balanced to avoid instability of the center of
gravity of the base.
HEAVY! You may need
assistance with this step.
Desk
Desk
2X Cable tie
Tilt Adjustment
Tilt Adjustment
F1
T
Large Allen Key
1. If the monitors can stay at the
desired height by itself, no
adjustment needed.
2. The tilt angle of the monitor
will not be adjusted if the set
screw [T] is over-tightened. In
this case, you need to turn the
set screw [T] in anti-clockwise
direction to decrease torque until
the monitors can be hovered at
any position.
3. The monitors will drops
automatically if the set screw [T]
is over-loosen. In this case, you
need to turn the set screw [T] in
clockwise direction to increase
torque until the monitors can be
hovered at any position.