3 Deployment and Maintenance
User's Manual
HT8000-I/HT8000-II/HT8000-VI
88
Beijing Huahuan Electronics Co., Ltd.
Version 1.4(Oct.2019)
After logging device through Telnet or Console port, you can carry out the
following command to query and set the out-of-band IP and MASK. Telnet
command format: Telnet IP, default login username is admin and password
is Admin123.
Query IP/MASK address:
Hios(config)#interface gigabitethernet 1/0/1
Hios(config-gigabitethernet1/0/1)#show ip address
Set IP/MASK address:
Hios(config)#interface gigabitethernet 1/0/1
Hios(config-gigabitethernet1/0/1)#ip address 192.192.43.45/24
Note: In order to avoid configuration loss after power failure and restart,
after information is modified, you must use write command under the
config
node to save configuration. Such as Hios(config)#write.
3.2 Monitoring Software
For detailed usage of network management monitoring software, please
refer to the online help of network management software.
CAUTION
For security reasons, you’d better change the password in time when you
use the device for the first time.
