HTW INNOVA HTWS026INNR32-INT Owners And Installation Manual Download Page 5

3

Precautions

Appendixes

WARNING

Air Conditioner should be properly grounded. Incorrect 

grounding may cause electric shock. 

Don't use unqualified power cord. 

Make sure the power supply matches with the requirement of 

air conditioner.Unstable power supply or incorrect wiring will 

cause malfunction. Please install proper power supply cables 

before using the air conditioner.

Properly connect the live wire, neutral wire and grounding wire 

of power socket. 

Be sure to cut off the power supply before proceeding any work 

related to electricity and safety. 

Do not energized before finishing installation.

If the supply cord is damaged, it must be replaced by the 

manufacturer,  service agent or similarly qualified persons to 

avoid hazard.

The temperature of refrigerant circuit will be high, please keep 

the interconnection cable away from the copper pipe.

The appliance shall be installed in accordance with national 

wiring regulations.

Installation must be performed in accordance with the 

requirement of NEC and CEC by authorized personnel only. 

The air conditioner is the first class electric appliance. It must 

be properly grounding with specialized grounding device by  

professional person. Please make sure it is always grounded 

effectively, otherwise it may cause electric shock. 

The yellow-green wire in air conditioner is grounding wire, 

which can't be used for other purposes.

The grounding resistance should comply with national electric 

safety regulations. 
The appliance must be positioned so that the plug is accessible. 

Summary of Contents for INNOVA HTWS026INNR32-INT
























Reviews: