HTW HTWS026PLUVWF, Owner'S Manual, Page: 36 / 104

USER’S MANUAL
〖
Remote Controller Display
〗
Instruction for remote controller
Sleep Mode Display
Displayed when Pressing
“Sleep” button, the unit will
run in sleep mode.
Wind Speed Selection
Display
On/Off Timer Display
The ON/OFF symbol will display
Setting temp Display
Displayed the setting
temperature.
Timer Display
Display hour when setting
UVC Display
It appears when UVC
function is set.
Signal Emission Symbol
It appears when control
signal is emitted.
Turbo Display
It appears when turbo function
is set in COOLING or HEAT
mode, and
will flash.
Operating Mode
Selection Display
AUTO
COOL
DRY
HEAT
SWEEP
Horizontal Swing
Display
Displayed when Pressing
“H-SWEEP button.

The remote controller uses two AAA batteries under normal condition, the batteries last
for about 6 months. Please use two new batteries of similar type (pay attention to the poles in
installing)

When using remote controller, please point the signal emitter towards indoor unit receiver;
There should be no obstacle between remote controller and indoor unit.

Pressing two buttons simultaneously will result wrong operation.

Do not use wireless equipment (such as mobile phone) near indoor unit. If interference occurs
because of this, please switch off the unit, pull out power plug, then plug again and switch on
after a while.

There is no direct sunlight to the indoor receiver, or it can not receive the signal from the remote
controller.

Don’ t cast the remote controller.

Don’ t put the remote controller under the sunlight or near the oven.

Don’ t sprinkle water or juice on the remote controller, use soft cloth for cleaning if it occurs.

The batteries must be removed from the appliance before it is scrapped and that they are
disposed of safety.
timer.
when setting the timer.
Auto
High speed
Medium speed
Low speed
Q uiet speed
Vertical
Swing Display
Displayed in according with
vertic
al blades position and
swing or not.
Lock Display
Displayed when Pressing
“LOCK” button.
also can display the
temperature when setting
I FEEL function
34