Htek UCV Series, User Manual

Page: 83 / 111

Function Key
83
To configure the Private Hold via Phone interface
1. Tap Settings→ Features→ DSS Keys→ Line Key2(for example) or Menu

Settings→ Features→ DSS Keys→ Line Key2(for example)
2. Tap
Type to select the Private Hold in the Type field.
3. Tap Save to save the configuration.
To configure the Private Hold via Web interface
1. Click Function Keys→ Line Key.
2. Select the desired Line Key and select Private Hold in the Type field.
3. Click the button to save the configuration.
Note:
Please contact the system administrator whether support this feature or not.
Multicast Paging
You can use multicast paging to forward out time sensitive announcements quickly and
easily to people within the multicast group. You can configure a multicast paging key or a
paging list key on the phone, which allows you to send a Real Time Transport Protocol
(RTP) stream to the pre-configured multicast address/addresses without involving SIP
signaling. You can configure the phone to receive an RTP stream from pre-configured
multicast listening address/addresses without involving SIP signaling. You can specify up
to 10 multicast listening addresses.
Sending RTP Stream
To configure a Multicast Paging key via Phone interface
1. Tap Settings→ Features→ DSS Keys→ Line Key2(for example) or Menu

Settings→ Features→ DSS Keys→ Line Key2(for example).
2. Tap
Type to select the Group Listening in the Type field.
3. Enter the multicast IP address and port number (e.g., 224.5.6.20:2000) in the Value
field. The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
4. Tap
Save
to save the configuration.