4.
Connect the other end of the DisplayPort cable to the DisplayPort port on the graphics
card of your computer where the monitor is also connected. Do not connect the
DisplayPort cable to ports on the motherboard.
5.
Insert the headset cable connector (side with triangle mark up) to the port on the converter
with the corresponding triangle mark.
Restarting the converter for VIVE Cosmos Elite
If you need to restart the converter, follow these steps.
1.
Close the VIVE Console app as well as SteamVR app on your computer.
2.
Unplug the power cable from the converter.
3.
Wait for a few seconds, and then plug the power cable back in. On your computer, you
might see a notification that drivers are being installed. Wait for the installation to finish.
4.
To verify that VIVE hardware are detected, restart the VIVE Console app on your computer.
42
Converter
