HTC HOME
SECURITY
SELF-INSTALL | 13
Using Your Security System
Arm from panel
1.
Ensure the “Ready to Arm LED” (#2 on diagram above) is illuminated, and enter your user code.
2.
Make sure you exit the premises within 60 seconds to arm in
AWAY mode
. The keypad will beep
once every second for the first 50 seconds, then three times a second for the last 10 seconds during
the exit delay.
3.
To arm the system in
STAY mode
, stay within the premises and do not open any monitored doors.
This mode will bypass the interior protection (motion sensor) and arm only the exterior sensors. The
60-second exit delay will still sound and, once completed, the system will be armed.
