HTC CLIO200, User Manual

Page: 28 / 124

28 Getting Started
1.7 Powering On the Mobile Computer for
the First Time
After inserting and charging the battery to full charge, you can power on
and set up your Mobile Computer.
Turn on the power
1.
On the right side of your
Mobile Computer, slide the
HOLD switch for 1 to 2 seconds
to turn on the power.
2. The Mobile Computer starts up and runs the Power On Self Test
(POST). The POST is a series of built-in diagnostics performed by the
BIOS in the Mobile Computer when it is started.
Tip
During startup, press the DEL key if you need to enter the BIOS
and change BIOS settings. To protect your Mobile Computer from
unauthorized use, it is recommended that you set a supervisor
password in the BIOS. See Chapter 5 for details.
3.
After the POST finishes, you will be prompted to set up
Windows Vista®.
Tip
You can shutdown either from the Control Center or Windows Vista®’s Start
menu. See Chapter 2 for details.
Set up Windows Vista® Business Edition
Your Mobile Computer is preinstalled with Windows Vista® Business Edition.
The first time you turn on your Mobile Computer, Windows Vista® runs a
setup wizard to detect hardware components and install drivers. Follow
the instructions on the screen to set up Windows Vista® and complete the
wizard.
Install the anti-virus software
Your Mobile Computer comes with PC-cillin Internet Security which is Trend
Micro’s anti-virus software. Before installing this anti-virus software, you
need to do the following first:
• Log into Windows with Administrator privileges.