VEGA74
EN - 28
7. OPERATIONS WITH THE MEMORY
7.1.
SAVING MEASUREMENTS
The structure of the memory is divided into two independent areas for the SNAPSHOTS
section (PQA, LEAKAGE, AUX snapshots
– max 999 locations) and for RECORDINGS
(PQA, AUX, LEAKAGE recordings). The SNAPSHOTS section memory is of "tree" type
with the possibility to expand/hide the nodes, allows the division up to 3 markers nested so
as to finalize the precise locations of the measuring points with the insertion of test results.
Each marker has associated up to
20 fixed names (non-editable or deletable)
+ max 20
names that can be freely defined by the user by means of management software (see the
online help of the program). For each marker, it is also possible to associate a number
between 1 and 250.
7.1.1. Saving snapshots
1. At the end of each measurement, press the
SAVE
key
or touch the
icon to save its result. The screen to
the side appears on the display.
The meaning of the icons is the following:
➢
→
It expands/hides the selected node
➢
→
It allows the choice of a 1
st
level node
➢
→
It inserts a nested sub-node (max 3 levels)
➢
→
It adds a user comment on the performed
measurement
2.
Press the
or
key to insert a main marker or
a sub-marker. The screen to the side is shown by the
instrument.
Touch one of the names on the list this to select the
desired marker. Touch the arrow keys
or
to
enter a number associated with the marker, if needed.
Confirm the choices by returning to the main screen.
Touch the
key. The following screen appears on
the display:
3. Use the virtual keyboard to enter any comment on the
measurement. This comment will be visible both after
downloading the saved data to a PC with management
software (see § 8) and recalling the result at display
(see § 7.1.2)
Confirm the choices by returning to the main screen.
Further confirm to permanently save the measurement
in the internal memory. A confirmation message is
provided by the instrument.
