HT Italia VEGA 76, User Manual, Page: 21 / 60

VEGA 76
EN - 19
5.4. ANALYZER MEMORY
This option permits to display:
•
The present content of the instrument memory
•
The size of memorized data
•
The residual space available for future recordings (expressed in days and hours)
All stored data can be displayed only if downloaded to a PC by means of the
software.
After selecting “ANALYZER MEMORY” from the Main Menu the screen below will be
displayed:
ANALYZER MEMORY
01 Smp 02.01 01:23
02 Rec 02.01-02.01
03 R&a 02.01-02.01
04 Rec 02.01-02.01
05 R&a 02.01-02.01
06 Rec 04.01-05.01
DATA SIZE:0.11Mb
REC TIME: 0d.06h
↑ ↓
LAST ALL
Example of ANALYZER
MEMORY screen
•
Rec: recordings effected with respective Start and Stop dates expressed in the
format “day.month” (start) – “day.month” (stop) without Voltage Sag and
Surge detection.
•
R&a: recordings effected with respective Start and Stop dates expressed in the
format “day.month” (start) – “day.month” (stop) with Voltage Anomalies (Sag
and Surge) detection (only for Skylab).
•
Smp: values of the samples of voltage and current stored by pressing SAVE.
•
DATA SIZE: size of saved data.
•
REC TIME: size of available memory, calculated on the basis of the parameters selected
for recording, therefore the most complete one (expressed in the format
“days.hours”) to make recordings.
The maximum quantity of Rec + R&a + Smp which can be contained by the instrument is
35.
Following keys are enabled:
•
F1 , F2 : (only if the quantity of Rec+R&a+Smp is higher than 7) to run over all the
recordings stored in the instrument memory.
•
F3 : to cancel the last recording effected.
•
F4 : to cancel all the recordings effected.