• 8 •
7. MAINTENANCE AND CARE
•
Clean the ring terminals each time you are finished using them. Wipe off any
battery fluid that may have come in contact, to prevent corrosion.
•
Occasionally clean the case of the unit with a soft cloth.
•
Coil the ring terminal cord neatly when storing the unit. This will help prevent
accidental damage to the cord.
•
Store inside, in a cool, dry place.
8. TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The monitor’s blue
CONNECTED LED
never turns solid.
The vehicle may be out of
the range of the wireless
router.
The wireless connection
may have been set up
incorrectly.
The internet connection
may have been lost for a
short time.
You may need a wireless extender,
to bring the signal close enough to
the vehicle for proper operation.
See Section 4.
To conserve battery power, the
monitor goes into deep sleep mode
and may require up to 12 hours
before it sends battery data to the
Cloud (this will show in the App).
When the wireless connection is
again available, pressing the Status
button will put the monitor back on
its original reporting schedule.
The monitor will
not turn on when
properly connected.
Poor electrical connection
or a blown fuse.
Check battery connections
and fuse.