• 6 •
NOTE: To assure a good wireless signal, the monitor should be secured close
to an opening on the vehicle.
7. Upon connecting the monitor to a battery, the yellow/orange LED will flash for 5
minutes. Use your smartphone to set up the wireless connection, if not already
connected. After 5 minutes, the yellow/orange LED stops flashing, and the
monitor starts working.
8. Connect the monitor to your charger. Use only the quick connect output cable on
the Schumacher charger to plug into the monitor. Within 15 minutes, the blue LED
should change from flashing to solid, indicating a connection to a wireless network.
6. USING THE BATTERY MONITOR
The monitor operates in low power mode most of the time, to avoid drawing
excessive energy from the battery. At predetermined time intervals, it wakes to
send a battery status signal to the Cloud.
When the monitor wakes, the blue CONNECTED LED will flash while it tries to
connect to the wireless signal. When the connection is successful, the LED will light
solid for the reminder of the wake time.
USING THE S APP
1. Open the S App.
2. Log in, using the email address and password that you provided when you
registered. If you forget your password, select Forgot Password.
3. The HOME screen shows all connected monitors (and chargers).
•
Swipe left on a monitor to bring up the screen to delete the monitor
or edit the device name.
• To add additional monitors, select Add Monitor.
•
Use one of the arrows on the right to select
the monitor you want to check.
•
Press the % button to bring up the Status screen.