Air
Mover
An electrically operated unit for the
removal of fumes from work areas
and ventilating confined spaces.
Approved for use in CENELEC zone
1 & 2 areas.
Operating & Safety Guide SS04
Keep the equipment clean
– you will find this less of a
chore if you clean it regularly, rather than wait until the
end of the hire period.
When not in use
, store the equipment somewhere
clean, dry and safe
from thieves.
Switch the air mover OFF and wait until the fan
blades have stopped.
Unplug the unit from its power supply then
disconnect the ducting.
Neatly coil the power supply cable and collect all
parts together ready for return
, to your local HSS Safe
and Sure Depot.
FINISHING OFF
Code 56830
©HSS Hire Service Group Plc 2000 No. SS04/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.co.uk/safeandsure
Contact your local
0845 608 8811
…any comments?
If you have any suggestions to enable us to improve
the information within this guide please fax your
comments or write to the Product Manager at the
address below
Fax: 020 8687 5001
SS04/01
Air Mover Specification
Description
Air Mover Electrically Powered.
Code
EEx d IIB T4
Blow Rate
2,300 cfm (reduced to 1,550 cfm if
the ducting is turned to 90°).
Power Source 240V.
Air Pressure
5.0 bar.
Weight
20 kg.
Conditions of Air ducting MUST be anti-static.
Certification
