Steam Vacuum
Cleaner
Steam Vacuum
Cleaner
Operating & Safety Guide 474
Operating & Safety Guide 474
This steam cleaner is designed to
easily remove unwanted residues
from tiling, enamelled surfaces and
stainless steel.
Code 59402
474/01
474/01
©HSS Hire Service Group Ltd 2006 No. 474/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.com
…any comments?
If you have any suggestions to
enable us to improve the
information within this guide
please e-mail your comments or
write to the Safety Guide
Manager
at the address below
e-mail: [email protected]
... have you been trained
The law requires that personnel using steam cleaner must be
competent and qualified to do so. Steam Vacuum Cleaner
training available at HSS Training Solutions
0
08
84
45
5 7
76
66
6 7
77
79
99
9
Never push the equipment beyond its design limits. If it will not
do what you want with reasonable ease and speed, assume you
have the wrong size or model for the job. Contact your local HSS
Hire Shop for advice.
Keep the equipment clean, you will find this less of a chore if you
clean it regularly, rather than wait until the end of the hire
period.
Check the waste bucket at regular intervals and empty as
necessary, following the instructions in ‘EMPTYING THE WASTE
BUCKET’. Remember, it is your responsibility to dispose of any
dirt in a responsible manner.
Handle the equipment with care. Avoid dropping it, knocking it,
or otherwise exposing it to damage.
When not in use, store the equipment somewhere clean, dry
and safe from thieves.
EQUIPMENT CARE
Switch OFF and unplug the steam cleaner.
Disconnect the head, wand and hose. Empty the dirt tank.
Collect all the parts together, neatly coil the flex and give the
tool a final clean up ready for return, to your local HSS Hire
Shop.
FINISHING OFF
REFILLING THE MACHINE
EMPTYING THE WASTE BUCKET
1
1
2
2
3
3
4
4
1
1
2
2
3
3
4
4
The red light will flash
when water is running out
To fill the boiler let all
steam out of the boiler by
keeping the steam trigger
pressed
Switch off the appliance
and unplug from the
mains. Wait a few minutes
before opening the boiler
safety cap
Refill the boiler using the
funnel 1.4Ltrs Max
Unlock clamps
Remove transparent cover
Remove waste bucket.
Empty waste bucket
and clean thoroughly
Replace bucket cover
and lock clamps
The waste bucket must be emptied upon hearing the
audible alarm & vacuum cut off. Switch off & disconnect
from mains.
