HSM VK 5012, Operating Manual

Page: 15 / 96

6.417.999.120 Issued 06/2005
General information
VK 5012
2.3
2.4 Scope of application and proper use
The HSM VK 5012 is a hydraulic baling press capable of continuous loading.
The material to be pressed is transported to the machine on an inclined feeder
conveyor.
The pressing cycle is initiated with the aid of light barriers in the hopper.
The pre-compactor pushes the material into the press chamber, the press ram
moves forward and compacts the material. The baling press has a cutting edge
clearing device to prevent material from jamming in the shearing area.
The baling press can be refilled even during the pressing cycle.
The HSM VK 5012 is specially designed for compacting paper, cardboard,
plastic foil and any other materials listed in the contract.
Any other use is considered improper.
The manufacturer accepts no liability for damage resulting from improper use
the operator carries sole responsibility for such use.
Proper use also includes carrying out installation, assembly, reassembly, start-up,
operation and maintenance work as prescribed by the manufacturer.
The relevant accident prevention regulations and any other generally recognised
health and safety standards must also be observed.
2.5 Warranty
The warranty conditions for the HSM VK 5012 are outlined in our general terms and
conditions or in a special contract concluded with you.
In order to prevent damage resulting from ignorance we recommend a general
maintenance and inspection contract
.