manualshive.com logo in svg

HS-Technik PowerRiv HST-PR, Manual, Page: 3 / 47

Share
Download
HS-Technik PowerRiv HST-PR Manual Download Page 3

- 3 -

- 3 -

Table of contents

 ____________________________________________________

5. 

PROGRAMMING THE RIVETING TOOL FOR SPECIAL APPLICATIONS................................. page  26

5.1. 

Connecting the riveting tool to a computer .................................................................... page  26

5.2. 

Starting the "Tool Manager" software (Niettechnik.exe) ................................................. page  27

5.3. 

Change settings of the tool ................................................................................................ page  28

6. 

MAINTENANCE AND DISPOSAL ........................................................................................... page  31

6.1. 

Changing / extending the chuck jaws and extensions ................................................... page  32

6.2. 

Changing the nosepiece .................................................................................................... page  34

6.2.1.  Compression bushing ........................................................................................................... page  35
6.3. Cleaning ................................................................................................................................ page  36
6.4. Storage .................................................................................................................................. page  37
6.5. Disposal .................................................................................................................................. page  37
7. 

TECHNICAL DATA .................................................................................................................. page  38

7.1. 

Explanation of display indicators ........................................................................................ page  39

7.1.1.  Battery status ......................................................................................................................... page  39
7.2. 

Overview of display indicators ............................................................................................ page  40

8. TROUBLESHOOTING .............................................................................................................. page  42
9.  

DRAWINGS ............................................................................................................................ page  43

10. 

LIST OF REPLACEMENT PARTS ............................................................................................... page  45

11. 

DELIVERY CONTENTS ............................................................................................................. page  46

 

Declaration of EU conformity .............................................................................................. page  47

Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90

E-Mail: [email protected] – Web: www.hs-technik.com

Summary of Contents for PowerRiv HST-PR
















































Reviews:

No comments