RevE 18/02/14
7
The front section should now be lifted
forward and away from the retaining
clips (Shown in diagram 6).
Removing the Glass
The glass is held in place by 4 fixing clips,
2 at the top and 2 at the bottom. Slightly
slacken the lower two fixing screws with a
flat blade screwdriver (There is no need
to fully remove the screws). Holding the
glass with one hand, slacken off the top 2
fixing screws (Diagram 7) until the clips
have moved away from the glass panel.
The glass panel can then be lifted out.
Levelling the Stove
To achieve the optimum operating
results the stove should now be levelled
with its surroundings. This is carried out
by increasing or decreasing the length
of the 13mm levelling bolts located on
the inside of each of the stove legs
(Diagram 8).
Diagram 6
Diagram 7
Diagram 8