HS GAS Select 6, Installation And Servicing Instructions, Page: 6 / 19

RevE 18/02/14
6
Additional Air Venting (GB Only)
The supply gas heat input into the appliance is nominally less that 7kw, therefore
under the directives of the current gas safety installation and use regulations (1995)
No additional air vents are required in the room the appliance is situated.
Removing the Stove Body
T
HE BODY OF THE STOVE IS HEAVY
! T
AKE CARE REMOVING STOVE PARTS
.
Removing the Top Plate
Carefully lift the top off the stove as
shown in diagram 3.
Removing the Cast Iron Doors
Open the left-hand door. Gently lift
the door until the hinge pins (Top and
Bottom) are free from the hinges
(Diagram 4). Carry out the same
process for the right-hand door.
Removing the Stove Front
The stove front is secured by two
10mm bolts located on the under-side
of the front plate (Shown in diagram 5)
and by two retaining clips at the top
left and right hand side of the front
plate. Whilst holding the front section
in place, the two bolts should be
removed.
Diagram 3
Diagram 4
Diagram 5