HRW HPE-BNMBUS V401 Manual 180307 E. & O. E. / Subject to change without notice
Page 16 of 24
Data Base Mapping Tool
Although all configuration can be typed directly in to the gateway via the terminal program, by email
request or by download from
www.hrw.hk
, Resources/Tools, you can use our the M-Bus mapping Tool
for creation of a table of data base settings which can be downloaded to the gateway as a text file
(*.txt).
Copy the Point Configuration Text from the tool to Notepad text file and save for download to the
gateway:
Terminal Operation
After entering terminal mode with TTTTTTTT you will initially see the factory default settings.
Make settings such as BACnet node, baud rate, DI and MM directly by entering the required settings.
Note that after changing the BACnet baud rate the terminal mode baud rate is also changed so
reconnect HyperTerminal at the newly set baud rate and then Write (W) the new setting.
