Page 21
Huddle Hub One / Huddle Hub One+ Configuration Guide
5.3 Rooms section
Every HHO unit can enable up to four rooms, each one hosting an independent session.
The hub room is the one where the TV and webcam - if any - are installed and connected to the unit.
It is also the only room where the Multicam feature can be enabled. In the Rooms page the hub room
is always the leftmost one, and is identified by a small HHO icon after its name.
The
Create new
button creates a new room, and the
Delete room
button removes an existing room
(except the hub room, which cannot be removed).
Each room can be configured with the following parameters:
Room name
The name that will appear in the Huddle Hub App clients when the participants choose a room to
start or join a session. Max 16 characters of any kind.
Passcode protection
When checked, a passcode is required to join a HHO session. The passcode is a random four digits
number, automatically generated by the system when session starts. Every new participant must
type in the passcode to join the session.
Force passcode request to the first participant
This flag is available only in the hub room. If checked, even the first participant is required to enter the
passcode when starting a session, which is visible on the welcome screen.
Do not activate this option if there is no screen connected tho the HDMI port of the unit, because in
that case the first participant has no way to know the passcode.
Web viewer on HTTPS
When viewing a presentations with a web browser, a HTTP connection is used. By enabling this
checkbox you allow an HTTPS connection also.
While connecting to a room with HTTPS, you may receive a security warning from your browser. This
happens because the SSL certificate provided by the HHO web server is self-signed, and this is a
normal situation with secure servers located on embedded systems. You can confirm you want to
proceed.
Presentation quality parameters
Select the resolution (Full HD = 1080p, HD = 720p) and frame rate (30 or 10 frames per second).