Page 16
Huddle Hub One / Huddle Hub One+ Configuration Guide
5 Configuring Huddle Hub One
5.1 Status section
The Status page is a read-only area that recaps all the parameters, useful when you want to have a
look at the entire configuration without making any change.
This is the only available section when HHO is hosting one o more sessions, as reported by the
message “Session is running. Modifications disabled”.
Please see the following chapters for a detailed description of the parameters.
5.2 Huddle Hub section
This section contains HHO general configuration parameters.
5.2.1 General
Hub name
This is the name of the device and identifies your HHO unit. To avoid confusion, please assign unique
names when you have multiple HHO units connected to the same network. Name can be from 4 to
16 characters long: numbers, uppercase and lowercase letters, underscore and dash can be used;
special characters and spaces are not admitted.
When starting, if a HHO unit finds another unit with the same name in the network, it will add a post-
fix number to its name to make it unique.
Admin password
The password field contains the keyword to access the Web Console. It can be from 5 to 48
characters long: numbers, uppercase and lowercase letters, underscore and dash are admitted;
special characters and spaces are not allowed. The default value is “admin”. The checkbox Show
password makes your password visible while typing.
Language
Select the user interface language for the HHO Web Console and for the welcome screen.
Automatically install new updates at boot
If this checkbox is active, at every power-on or reboot HHO connects to the HRT software repository
to search for firmware updates, and automatically installs the latest release. The automatic update
requires a network connection with access to Internet.