TP809 Programming Manual
53
FS 2
[Function]
Define user
-
defined Kanji characters
[Format]
ASCII
FS
2
c1 c2 d1...dk
Hex
1C
32
c1 c2 d1...dk
Decimal
28
50
c1 c2 d1...dk
[Range]
The ranges of c1 and c2 differ, depending on models and the character code
system used. The ranges of c1 and c2 for each model are as follows.
0
≤
d
≤
255
[Description]
Defines the user
-
defined Kanji character pattern specified by the character
codes (c1 and c2) of the currently selected Kanji font.
•
c1 specifies the first byte of a character code for a user
-
defined Kanji
character.
•
c2 specifies the second byte of a character code for a user
-
defined Kanji
character.
•
d specifies the defined data (column format).
•
k indicates the number of defined data. k is an explanation parameter;
therefore, it does not need to be transmitted.
[Notes]
■
This command is effective only for the Japanese, Simplified Chinese, Traditional
Chinese, and Korean models.
■
The printer processes
k
byte data of
d1
...
dk
as defined data. The defined data (
d
)
sets a corresponding bit to 1 to print a dot or to 0 not to print a dot.
■
The number of characters to be defined differ, depending on the printer models.
■
Different user-defined characters can be defined for each Kanji character. Kanji
fonts can be specified by function 48 of
FS ( A
.
■
Defined data is effective until it is redefined,
ESC @
is executed, the printer is
reset, or the power is turned off.
■
User
-
defined characters are not defined and space is printed at the default.
Models
c1
c2
Japanese model (JIS code)
c1
= 77H
21H
c2
7EH
Japanese model (SHIFT JIS code)
c1
= ECH
40H
c2
7EH,
80H
c2
9EH
Simplified Chinese model
c1
= FEH
A1H
c2
FEH
Traditional Chinese model
c1
= FEH
A1H
c2
FEH
Korean model
c1
= FEH
A1H
c2
FEH
Summary of Contents for TP809
Page 1: ...TP809 Programming Manual Rev 1 2...
Page 32: ...TP809 Programming Manual 26...
